Flower

[KenRab]

I need to see what you would charge to turn this JPEG into an SVG file. It needs to be 4 ft.². It will be cut out of 1/8 inch aluminum.

 

[SignTorch]

that's a pretty picture - see notes below

- Login or Sign Up - to See More Content -

 

[SignTorch]

that's not a real picture of a real metal object - it will need to be adapted to be one piece and the veins and some features need to be much wider - the red line shows one vein is a .1" wide strip to scale at 48" wide - it will still look good but it won't have such thin lines

 

[SignTorch]

I typically aim for .05" kerf clearance and .1" minimum metal width

if you need different specs for aluminum just let me know

 

[SignTorch]

the image is 48" x 34" - if you want it to be 4 ft.² it can be centered in a square

or it won't look too good to just stretch it that much vertically so some additional leaves and background will have to be added and that will add some additional cost