Objects Hexagonal Brazier

[camo1280]

Hello all,
a contribution to this site now......It is a brazier I created through a little trial and error, the design drawings etc are all my own.
I have included a few photos to save making instructions...... I used a 12 ton workshop press to do the sides, but they could be cut at the fold line and re welded at the right angle (angle gage included).
Once the 6 sides are together I held the base at the required height and tacked it in place.
I did this with 5mm mild steel. I'd be glad to see photos of what anybody else can make out of this.
Enjoy

 

[omng945]

Cool! Nice work.

 

[camo1280]

I should add that the other two brackets are designed to take a standard bbq rotisserie kit.....

 

[James Cox]

Very nice, thanks..

 

[Vladislav Kucherenko]

Thanks

 

[Stephen Knight]

When I open this to cut it has all of the measurements big. the folded plate is at 240 x119

 

[SignTorch]

When I open this to cut it has all of the measurements big. the folded plate is at 240 x119

its metric

some software has features to open or import metric files into an inch workspace

or you can scale everything down to 3.94%