Unforgotten Heroes

[RusticOak]

Hello!!

Customer wants to use the attached tattered flag svg file. The other file is his logo. He wants the wording put on the new flag and the 3 colored stripes. Depending on how you do the wording this could be 4-6 layers. Flag needs to be 24" and vertical just like his logo. Not sure of the font name but he wants it close and maybe some detail IF possible. Thank you!!

 

[SignTorch]

ok - text detail options in/around the text is limited at the size on the left - which I assume is the intended text size/location - if the text is 24" wide like on the right it would allow some sharper detail(s) but not really much more detail - can't do halftone shading like that inside the text in that size range - will do a draft for approval on the text location - my instinct is to place it lower on the new flag compared to the old

let me know if you want it bigger like on the right because that has a huge effect on drawing detail(s)

I don't think it will be 4 or 6 layers unless you want the text to be elevated onto extra layers over top of the flag layers - but never quite sure how the layers will be exactly until I get it laid out - let me know if you do want extra-elevated text

I am deleting the flag SVG file from your post so that it isn't shared

 

[SignTorch]

- Login or Sign Up - to See More Content -

 

[RusticOak]

Let me check....

 

[RusticOak]

He wants the bigger wording. I don't think the inside details would look very good cut out. What do you think? Can we get the outline effect? I was thinking they would have to be a different layer so the color stripes don't show thru the text. Guess the red and blue could be 2 pieces. You're the expert! Do it however you think it needs to be done.

 

[SignTorch]

file sent in message... - 3 layers - layer 2 colored parts have glue/tape tabs for attachment and holes for powder coating - layer 1 (back/black) has a hole for powder coating (visible from back when assembled) - size of cut file is 57.5" x 33" - finished size is 24" x 24"

 

[RusticOak]

Thank you!!!!